Waupaca Sport and Cycle, LLC

Fast quality service. Very fair pricing. Very satisfied. He even picked up and dropped bike off!
9 years ago (08-07-2017)

We broke down on the highway; they brought their trailer and got us back on the road the same day. Luckily, it wasn't a catestrophic issue. Even luckier that we called waupaca sport and cycle.
9 years ago (13-09-2017)

Took my 2007 raptor 700 to Waupaca Sport and Cycle asked him to make 2 separate maps for my raptor one for K&N and one for Prodesign filter and these are the issues I had with it after picking it up from the Dyno -Check plug burnt white (lean) -K&N lean on bottom and top and will stall out on the bottom sometimes -Prodesign running lean plug is also white -Dyno chart runs only to 4k engine runs lot higher than that and makes power and stock runs to 9k -Only 37hp that's what stock makes should easily be 50 or higher -66 lbs of torque doesn't make any since in my set up way to high should be around 50 Took you 3 hours to tune when you only made one map and I asked for 2 separate maps and everywhere else takes 1 hour a per map -Didn't receive a record log - If I continue to run the machine the way it is will more than likely burn it down -Needs to be properly done again so I don't burn the machine down -292 miles round-trip twice roughly $40 in gas -You openly emitted you don't like power command 5 not sure you knew what you were doing -Plain and simple your Dyno was not set up properly or calibrated correct My raptor 700 has full Yoshimura exhaust 11-1 compression stage 2 cam Port and polish FCI intake with a PC5 on it
9 years ago (10-07-2017)